浅谈住户在装修时的墙体拆除

浅谈住户在装修时什么样的墙体可以拆除，什么样的墙体不可以拆除，及住户需拆除墙体时应办理的手续。     

对乒乓球"落点"的初步应用分析

通过问卷调查,访谈法、训练设计法,分析探讨乒乓球五要素中"落点"的开发、研究,旨在使大家对"落点"有更明确的了解.     

基于积分域匹配滤波的系统误差检测

目标跟踪中,如果用于数据融合的位置或速度测元中存在系统误差,可采用最小二乘意义上的微分平滑进行滤波及系统误差诊断。由于微分平滑精度较低,由此提出积分域匹配滤波,同时用这种方法检测系统误差。数学推导证明了积分域检测系统误差的精度高于微分平滑,仿真结果亦证实了此结论。     

复合材料机翼盒段的设计、模态分析和试验

为了进行机翼盒段结构的模态分析和试验,依据结构相似方法对盒段进行缩比,采用复合材料整体成型技术制造盒段模型,该模型同时实现了结构动力学相似与传力相似.对模型进行了模态分析和试验,两者结果吻合较好.本模型为在低速风洞中实现高速飞机机翼颤振试验奠定了基础.      

补燃发动机涡轮泵联试强迫起动程序设计

以采用强迫起动方式的补燃发动机涡轮泵联试系统为研究对象,建立了系统的动态模型.对联试装置进行了综合冷调试验并对联试的起动过程进行了数值模拟.结合综合冷调试验结果和数值仿真结果,制定了系统的起动程序.试车结果表明联试系统起动过程平稳.对计算结果和试验结果进行了对比,二者吻合的较好.     

Experimental study of partially-cured Z-pins reinforced foam core composites：K-Cor sandwich structures

This paper presents an experimental study of a novel K-Cor sandwich structure rein- forced with partially-cured Z-pins. The influence of pultrusion processing parameters on Z-pins characteristics was studied and the effect of Z-pins on mechanical properties was disclosed. Differential scanning calorimetry （DSC） and optical microscopy （OM） methods were employed to determine the curing degree of as-prepared Z-pins and observe the implanted Z-pins in the K-Cor structure. These partially-cured Z-pins were treated with a stronger bonding link between face sheets and the foam core by means of a hot-press process, thereby decreasing burrs and cracking defects when the Z-pins were implanted into the Rohacell foam core. The results of the out-of-plane tensile tests and the climbing drum peel （CDP） tests showed that K-Cor structures exhibited superior mechanical performance as compared to X-Cor and blank foam core. The observed results of failure modes revealed that an effective bonding link between the foam core and face sheets that was provided from partially-cured Z-pins contributed to the enhanced mechan- ical performances of K-Cor sandwich structures.     

Bluetooth无线接入技术及其应用

本文首先讨论了蓝牙 (Bluetooth)技术的基本概念 ,然后分析了蓝牙无线接入控制技术的特点 ,并对蓝牙无线接入技术存在的问题及发展方向提出了自己的见解     

Comments on "Unbiased converted measurements for tracking"

We show that there exists a compatibility problem in the derivation of the mean and covariance of the converted measurement errors in L. Mo et al. (ibid., vol.34, no.3, p.1023-7, 1998), and then present a modification to the computation of them, in which both the mean and the covariance are computed strictly conditioned on the measurements.     

机械加工引起桨毂轴套耳片疲劳裂纹分析

本文对某机型尾桨毂轴套耳片疲劳裂纹产生的根源,着重从影响产品疲劳特性的结构设计、设计选材,载荷及生产工艺等主要因素进行了分析。通过理论分析认为,引起疲劳裂纹的最大可能性是工艺加工所致。经过产品的断口分析及取样测试,确认为机械加工粗糙,有关尺寸不符合图纸要求,是这次疲劳裂纹产生的直接原因。     

直升机光纤陀螺IMU抗振设计及实时滤波方法

振动引起光纤陀螺(FOG, Fiber Optic Gyroscope)零偏误差,非线性、非高斯随机噪声及由其组成的惯性测量单元(IMU, Inertial Measurement Unit)非互易性解算误差,针对直升机航向姿态测量误差问题,提出了一种FOG IMU的机械减振与数据滤波相结合的振动抑制方法,建立了FOG IMU减振装置数学模型,通过优化设计实现线、角运动通道振动解耦,从物理上消除外界高频干扰振动源;研究实时小运算量、低时延数据滤波方法,抑制减振装置谐振干扰和惯性器件噪声,进而减小捷联解算非互易性误差.实验结果表明:采用该方法能有效地抑制外界干扰振动和系统噪声,保证FOG IMU工作稳定性和精度,为研制应用于直升机的高性能航姿导航信息与航向姿态参考系统奠定基础.